Honda 1300 Coupe Forum
September 30, 2020, 07:21:29 AM *
Welcome, Guest. Please login.

Login with username, password and session length
News: Welcome to the Forum
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Replacement Door Seals Project completed  (Read 931 times)
Posts: 12

« on: June 14, 2018, 10:09:54 AM »

My 46 year old door seals have deteriorated a lot over the years and it was difficult to find a suitable replacement profile.

I finally found a great match on

Door Rubber Seal Horizontal Bulb 0.62" Bulb Height x 0.039"-0.137" Grip Range x 0.53 U Height (see attachments)

Because the car has wider metal across the top of the door and down the windshield post, I also bought a filler rubber from Amazon to hide the remains of the contact cement Honda used during manufacturing.

Trim-Lok X105BT-25 D-Shaped Rubber Seal (Thick Wall) EPDM Foam Seal  0.437 Height, 0.375 Width, 25 Length

Together they greatly improved the appearance of the door seals. By the way, the 'red grip' that secures the main rubber is very good and holds really well even if you removed it numerous times.
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!